Sound deterrents to prevent collisions with Kangaroos in Australia have been sold for many years. None have been shown to work. Whether the Volkswagen device will be any better waits to be seen. Collision data will have to be collected for a while to see if the VW device has any effect on collision rate.

That is an interesting concept, and it would be great if something out there worked. In the meantime, I will try not to drive at dusk 🦘

At one point, I knew the "sonic" animal guards were the most stolen components of cars. You head in, get groceries, and come out, and they are gone. They weren't on the car long enough for me to confirm that would work

Hi @rokshanabushra 

So are you looking to replicate something like this?

https://predatorguard.com/products/predator-deterrent-light

This is, in principle at least, fairly simple, as it's really just some red LEDs and a small solar-battery power system. You could buy one of the commercial options and do a teardown (or I can do it if you like, as I'd be interested to find out exactly what they are doing). 

In lieu of that, I suspect a light-dependent resistor is probably used to control the lights coming on at night (i.e. something along these lines: https://www.instructables.com/How-to-Make-LDR-Darkness-Sensor-Circuit-Simple-DIY/).

If you employ some sort of 'blink' or flashing protocol (you could use a 555 timer to keep the costs down), you could save quite a bit of power (compared to running the lights constantly). For example, something along these lines: https://www.instructables.com/Adjustable-SingleDual-LED-Flasher-Using-555-Timer-/ You could also add a PIR motion sensor so it only comes on when nearby motion is detected, but of course the costs of building goes up. 

There are also a few off-the-shelf flasher designs that might be cheap enough already to consider (e.g. https://www.ledsales.com.au/index.php?main_page=product_info&cPath=142_143&products_id=2820). This seems like a reasonably good option for low power, although I have no idea how well it actually works...You can also buy LEDs that flash by themselves (e.g. https://www.ledsales.com.au/index.php?main_page=product_info&cPath=148_152_159&products_id=2951).

If you think sounds might also help (e.g. human noises etc.), check out the Boombox from Freaklabs: https://freaklabs.org/technology/boombox/ and it should be possible to add 'eyes' in the form of reflectors, or, some kind of LEDs that activate at the same time as the sound. You could contact Akiba or Jacinta about it as I am sure they'd help if they can: https://freaklabs.org/about/#:~:text=providers%20including%20ARGOS.-,the%20team,-Chris%20%E2%80%98Akiba%E2%80%99%20Wang

Anyway, happy to help if I can and all the best for the project.

Cheers,

Rob

Hi Rokshana,

Maybe you can try this product from India called ANIDERS - 

 I think this product would help you a lot. This is their website - 

Read "ANIDERS - Animal Intrusion Detection and Repellent System | Kyari for Wildlife" on Kyari - Nursery of Innovations

ANIDERS - Animal Intrusion Detection and Repellent System | Kyari for Wildlife

Searching for an animal repellent solution? We at Kyari have come up with a mechanised scarecrow that can prevent crop raiding and increase crop yield. It is effective on Elephants, Wild Boar, Blue Bull (Nilgai) and Deer.

Kyari - Nursery of Innovations • 06 Oct 2016

Hi Jacobo,

We have launched a new tracking/logging/finding technology which you may find of interest https://www.tagranger.com/   

Based on LoRaWAN (but with yor own handheld gateway) you can communicate with your Tags in real time.  As well as requesting current GPS locations from long distances away you can also use the integrated ranging tools which give you distance to your Tag in metres when you get closer.  

Key features:

LoRaWAN (tested up to 21km line of sight) No infrastructure required, but you can also add it to your own LoRaWAN network.

UWB ranging gives distance (in metres) to the Tag up to 150m away

Hybrid Ranging combines the equivalent of a VHF pinger from a few km away (line of sight) with the UWB ranging when you get closer

Log Download remotely using UWB radio

Ultra light 39g Tag

Power Efficiency Defined by your configuration profie, 2 days to 4 years!

Let me know if you would like any further help with this.

Craig

Hi,

This is a really late answer but I was new to wildlabs then. I have a security appliance that uses state of the AI models and user defined polygon areas of interest that generates video alerts of intrusions in typically under a second.

Although its setup to install automatically on an NVidia AI on the edge boxes of your intentions were to monitor a great deal of cameras you could also install it on a desktop with a high end GPU for very high performance. At home I use a desktop with an rtx 2080ti and monitor around 15 cameras and a thermal imaging camera (old one).

I have also tested a high end model (yolov7) on a high end thermal imaging camera image and it works fine as well.

Thermal imaging cameras are hellishly expensive though and I’ve found that new extremely light sensitive cameras like the HIKvision colorvu series almost obsoletes them in terms of people detection at night at a fraction of the cost.

If you are interested I’d be happy to show you a demo in a video meeting sometime if you like. I’m pretty sure it would meeting all your intrusion detection and alerting needs.

My project page is